Features |
Principle |
The difference between spontaneous and stimulated emission of light is demonstrated. The beam propagation within the resonator cavity of a He-Ne laser and its divergence are determined, its stability criterion is checked and the relative output power of the laser is measured as a function of the tube's position inside the resonator and of the tube current. The following items can be realised with advanced set 08656-02. By means of a birefringent tuner and a Littrow prism different wavelengths can be selected and quantitatively determined if a monochromator is available. Finally you can demonstrate the existence of longitudinal modes and the gain profile of the He-Ne laser provided an analysing Fabry Perot system is at your disposal. |
Benefits |
set up and run a laser, that is by now classic, from its constituting elements |
get a feel for the delicate adjustments necessary to achieve lasing conditions |
dicover the way many parameters can influence the output of this gas laser |
Tasks |
1. Set up the He-Ne laser. Adjust the resonator mirrors by use of the pilot laser (left mirror: VIS, HR, plane; right mirror: VIS, HR, R = 700 mm). |
2. Check on the stability condition of a hemispherical resonator. |
3. Measure the integral relative output power as a function of the laser tube's position within the hemispherical resonator. |
4. Measure the beam diameter within the hemispherical resonator right and left of the laser tube. |
5. Determine the divergence of the laser beam. |
6. Measure the integral relative output power as a function of the tube current. |
The He-Ne laser can be tuned using a BFT or a LTP. Longitudinal modes can be observed by use of a Fabry Perot Etalon of low finesse. Remark: These points can only be covered quantitatively if a monochromator and an analysing Fabry Perot system are available. |
What you can learn about |
Spontaneous and stimulated light emission |
Inversion |
Collision of second type |
Gas discharge tube |
Resonator cavity |
Transverse and longitudinal resonator modes |
Birefringence |
Brewster angle |
Littrow prism |
Fabry Perot Etalon |
- 배송비 : 기본배송료는 2,500원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다) 100,000원 이상 구매시 무료배송입니다.
- 본 상품의 평균 배송일은 2일입니다. 설치 상품의 경우 다소 늦어질수 있습니다.
- 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)
- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.
- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.
- A/S는 판매자에게 문의하시기 바랍니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?